Source: ABNT NBR NM-ISO – Safety of Machinery – Safety distances to prevent danger zones being reached by the upper limbs. Figure 1. ABNT NBR NM ISO Norma TÃ©cnica ABNT NBR Arena TÃ©cnica. July 3rd, – Norma TÃ©cnica ABNT. Source: ABNT NBR NM-ISO – Safety of Machinery – Safety distances to prevent danger zones being reached by the upper limbs.
|Published (Last):||19 April 2016|
|PDF File Size:||2.97 Mb|
|ePub File Size:||17.53 Mb|
|Price:||Free* [*Free Regsitration Required]|
Other light curtain installation characteristics, such as a parallel approach, approach in angle and dual-position equipment shall meet the specific conditions provided in ISO Email Digite seu e-mail. Reaching over protective structure. Some of the standards generally required to apply to most machines are: The provisions of the abbt standards and annexes shall be observed, where applicable. Inspection at the final qbnt site. The section of 10 mm ten millimeters in thickness of the test gauge placed on the matrix — the lower part of the tool — shall not be touched during the descending course of the tool.
Issuance of test reports. The light curtain application in hydraulic press brakes shall meet EN C Requirements for the use of optoelectronic laser presence detectors — AOPD in hydraulic press brakes. Machines with a pneumatic system must comply with ISO and those with a hydraulic system must conform to ISO The applicable standards are confirmed.
Additional requirements for nbrnm-iao functions on trucks. The AGV is designed to avoid abnormal use whenever possible, if this creates risks. The light curtains shall be installed so that its detection area covers the access to the danger zone, with care taken not to provide spaces for the dead zone, i.
These criteria are also applied in the manufacture, importation, sale, exhibition and leasing of equipment, in all economic activities, taking into account other regulatory standards NRapproved by Decree number nbrnmm-iso, July 8, and official technical standards andIn the absence or omission of such standards, applicable international standards.
Safety of Machinery and Equipment According to NR 12 | VIKON
The test shall be performed with a handle — cylindrical part with 14 mm fourteen millimeters of diameter of the test gauge, as shown in Figure 3. Primary Menu Skip avnt content. Download the new NR12 ordinance and learn more.
The main objective of the standard is to ensure that safe machinery and equipment is inherently safe by requiring complete information on transport, use, maintenance and disposal. Sinova is part of the Study Committee CE The section of 35 mm thirty five millimeters in thickness of the test gauge placed on the matrix — the lower part of the tool — shall not be touched during the high-speed descending course of the hammer.
Safety Distance — d s. There shall be no interpolation of the values given in Table 2. The tests shall be performed with a test gauge provided by the AOPD laser device manufacturer, which consists of a piece of plastic with sections of certain dimensions for this purpose, according to Figure 3.
Safety – Sinova
Have the complete technical documentation. Get to know our NR12 conformity assessment services for machines and equipment according to the mandatory requirements. Then we perform a complete compliance assessment of the machines or 1385 and review the documentation. The compliance with NR 12 is mandatory for all new and used machinery and equipment.
Safety of Machinery and Equipment According to NR 12
Testing system in hydraulic press brakes equipped with optoelectronic laser presence detector:. In order to properly design a product and meet all specific safety requirements, we identify possible hazards and performs a risk assessment, then designs, manufactures and commissions this consideration, in anbt with ISO To become compatible with Brazilian legislation on the safety of machinery and equipment.
On hydraulic press brakes equipped with AOPD laser that uses a foot switch to actuate descending movement, it shall be of safe and have the following positions:. We 138852 manufacturers, importers or end-users of machines and equipment with the following conformity assessment:.
Verify the detection capacity between the tool tip and the laser beam — the closest to the tool. The opening of the tool can be activated, provided that the risk of falling product in process is controlled, with actuation of foot switsch to nbrjm-iso 3rd third position or releasing it to the 1st first position. Benefits of our NR 12 compliance services With the help of our NR 12 conformity assessment services for machines and equipment you will: Our Conformity Assessment Services We provide manufacturers, importers or end-users of machines and equipment with the following conformity assessment: Eliminate danger or reduce risks as much as the project allows design and construction of safe machinery ; take the necessary protection measures related to risks that cannot be eliminated; inform users of any deficiencies in the protection measures adopted; indicate if any specific training is necessary and; abnnt operating and maintenance manual.